Hiltra
Fire-resistant safety cabinets
| Model specifications | |
|---|---|
| Article number | 060600200 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 060600200 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS620 | 060600209 | € 46,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS620 | 060600211 | € 34,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS620 | 060600209 | € 46,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS620 | 060600211 | € 34,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
| Model specifications | |
|---|---|
| Article number | 060600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 060600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
| Model specifications | |
|---|---|
| Article number | 120600200 |
| Delivery Time | In stock now! |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (WxDxH) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 120600200 |
| Delivery Time | In stock now! |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (WxDxH) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Model specifications | |
|---|---|
| Article number | 120600201 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, rebellious | on a pallet, upright, H=2200 mm |
| Article number | 120600201 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, rebellious | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Model specifications | |
|---|---|
| Article number | 120600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 120600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
General specifications
Version 1.7 | June 9, 2026
F90 Hiltra® Labsaver® Fire-Rated Storage Cabinets LS620 - LS1220-EN
Design & fire resistance:
- Construction and configuration in accordance with the requirements of PGS 15:2021, version 1.0 (August 2021).
- Cabinets are suitable for indoor use only.
- Fire resistance of 90 minutes determined in accordance with European Standard (NEN-)EN 14470-1:2004 (for cabinets with a cubic volume of 1 m³) by the accredited testing institute MPA Dresden. Labsaver model LS620-EN complies with MPA certificate 2009-B-0024. Labsaver model LS1220-EN complies with MPA certificate 2008-B-4045. Note: For cabinets with a cubic volume of 2 m³, (NEN) EN 14470-1:2023 applies.
- Tested in accordance with European standards EN 16121 & EN 16122; Labsaver model LS620-EN complies with MPA certificate P000510830, Labsaver model LS1220-EN in accordance with MPA certificate P000510830/01.
- CE Declaration of Conformity in accordance with European Standard EN 45014.
- Interior lining: Formaldehyde emission class E1 per EN 13986; biological risk class 1 per EN 335-3; fire class B-s2,dO per EN 13501-1:2002.
Casing:
- Cabinet body and door made of Zincor steel and powder-coated in RAL 1007/daffodil yellow or RAL 7035/light gray.
- Fire-resistant insulation package made of non-combustible, environmentally friendly materials, finished with a white, impact- and scratch-resistant HPL top layer.
- Cabinet body is potential-free grounded to the grounding connection point on the cabinet roof.
- Cabinet interior is optionally potential-free grounded to the grounding connection point on the cabinet roof.
- Comes standard with freely adjustable leveling feet (±20 mm) for leveling the cabinet.
Door:
- Front equipped with a single or double self-closing hinged door with a handle positioned at an ergonomic height and lockable with a cylinder lock (includes 2 keys).
- The door is optionally available with a Thermolock fire-resistant locking mechanism, allowing it to remain open at an angle of 90º to 100º but to close automatically in the event of a fire.
- The door jamb is equipped with fire-sealing strips that expand in the event of a fire, ensuring the door jamb is hermetically sealed.
- Optionally available with Thermolock: The Thermolock locking and latching system allows the door(s) of the Labsaver® to be locked in an approximately 90° position. When a temperature of approximately 76°C is reached, the lock will release and the door closer will automatically close the door.
Interior:
- Interior made of Zincor steel and powder-coated in RAL 7035/light gray.
- Equipped with a removable, liquid-tight drip tray featuring a removable insert grid, with a load capacity of up to 75 kg.
- Note: According to NEN-EN 14470-1, a bottom collection tray without an insert grid may not be used as a placement or storage surface for packaging.
- The cabinet’s side walls are equipped with powder-coated steel shelf mounting plates featuring a hook-in grid for the shelves, which are height-adjustable in 50-mm increments.
- The shelf mounting plate also serves as a liquid drainage plate.
- Equipped with 3 freely removable shelves featuring a 30 mm high upstand as a slide-off protection and capable of supporting up to 75 kg with an evenly distributed load.
Ventilation openings:
- Equipped with an integrated air intake and exhaust channel in the rear wall.
- One exhaust vent in the cabinet above the bottom drip tray (low) and one ventilation opening in the rear wall (high).
- The supply and exhaust duct is equipped with fire dampers that close automatically in the event of a fire.
- Air intake and exhaust openings on the roof are equipped with a flange measuring Ø 80 x H 65 mm for on-site connection to a ventilation system or an optional cabinet fan.
Hazard warning:
- Hazard indication via the type label with pictograms prescribed in EN 14470-1, symbols: “No smoking or open flames” and “Flammable substances.”
LS620-EN Options:
060600215 Thermolock door-locking and automatic fire-closing system
060600207 Additional shelf
060600203 Steel drip tray, 466 x 420 x 80 mm, capacity 15.32 liters—only when used in combination with an (additional) shelf
060600212 HDPE drip tray, 488 x 415 x 50 mm, capacity 14.85 liters; for use only in combination with an (additional) shelf
120600218 Potential-free grounding for interior fittings
190170400 SWD Fan ENG 1–1.6 230V 0.2 A 24W IP20, steel
190170500 ATEX Fan ENG 2–2.5 230V 1.07A 120W IP55, steel
Options for LS1220-EN:
120600216 Thermolock door-locking and automatic fire-closing system
120600208 Additional shelf
120600206 Reinforcement profiles for shelf (load capacity up to 110 kg)
120600203 Steel drip tray, 1070 x 420 x 80 mm, capacity 35.25 liters—only when used in combination with an (additional) shelf
120600212 HDPE drip tray, 1060 x 415 x 50 mm, capacity 22.25 liters; for use only in combination with an (additional) shelf
120600218 Potential-free grounding for interior fittings
190170400 SWD Fan ENG 1-1.6 230V 0.2 A 24W IP20, steel
190170500 ATEX Fan ENG 2–2.5, 230V, 1.07A, 120W, IP55, steel
| Model specifications | |
|---|---|
| Article number | 120600200 |
| Delivery Time | In stock now! |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (WxDxH) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 120600200 |
| Delivery Time | In stock now! |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (WxDxH) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Model specifications | |
|---|---|
| Article number | 120600201 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, rebellious | on a pallet, upright, H=2200 mm |
| Article number | 120600201 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, rebellious | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Model specifications | |
|---|---|
| Article number | 120600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 120600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 1200 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 1095 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Double |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 1070 x 425 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 1093 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 38.9 liters |
| Maximum permitted packaging size | 35 liters |
| Storage capacity | 250 liters |
| Dead weight | approx. 375 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Thermolock door holdback system mounted for LS1220 | 120600216 | € 113,00 |
| Flat shelf (extra) for LS1220 RAL7035/grey | 120600208 | € 60,00 |
| Reinforcement profiles for shelf (loadable up to 110 kg) | 120600206 | € 26,00 |
| Drip tray steel H= 80 mm RAL7035 gray for LS1220 | 120600203 | € 48,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS1220 | 120600210 | € 78,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS1220 | 120600211 | € 54,00 |
| Top-mounted drip tray HDPE LxWxH; 1060x420x50/6 mm for LS1220 | 120600212 | € 177,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| Stainless steel transport pedestal LS1220-EN | 120600235 | € 287,00 |
| Model specifications | |
|---|---|
| Article number | 060600200 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 060600200 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS620 | 060600209 | € 46,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS620 | 060600211 | € 34,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Steel Floor Collection Tray, PC, RAL 7035/Light Gray, for LS620 | 060600209 | € 46,00 |
| Steel Insert Grid, PC, RAL 7035/Light Gray, for LS620 | 060600211 | € 34,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
| Model specifications | |
|---|---|
| Article number | 060600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Article number | 060600202 |
| Fire Resistance | 90 minutes |
| External Dimensions (W x D x H) | approx. 600 x 600 x 2035 mm |
| Internal Dimensions (W x D x H) | approx. 492 x 450 x 1824 mm |
| Internal height from the drip tray | approx. 1724 mm |
| Door | Only |
| Interior Design | 3 adjustable shelves, 1 bottom drip tray with insert grid |
| Shelf Dimensions (WxDxH) | approx. 466 x 420 x 30 mm |
| Shelf load capacity | 75 kg with an evenly distributed load |
| Dimensions of the bottom drip tray (WxDxH) | approx. 490 x 440 x 80/100 mm |
| Load-bearing capacity of the bottom drip tray | 75 kg with an evenly distributed load |
| Capacity of the bottom drip tray | approx. 17.7 liters |
| Maximum permitted packaging size | 16 liters |
| Storage capacity | 177 liters |
| Dead weight | approx. 230 kg |
| Packaging, transportation | on a pallet, upright, H=2200 mm |
| Options and accessories | ||
|---|---|---|
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
| Thermolock door holdback system mounted tbv LS620 | 060600215 | € 66,00 |
| Flat shelf (extra) for LS620 steel RAL7035 gray | 060600207 | € 37,00 |
| Drip tray steel H= 80 mm for LS620 RAL7035 gray | 060600203 | € 41,00 |
| Top-mounted drip tray HDPE 460x420x50/6 mm for LS620 | 060600212 | € 162,00 |
| Potential-free grounding for internal installation for LS620 and LS1220 | 120600218 | € 79,00 |
| SWD Fan ENG 1-1.6 230V 0.2A 24W IP20, steel | 190170400 | € 244,00 |
| SWD fan ENG 1-1,6 230V 0,2A 24W IP20, stainless steel | 190170601 | € 335,00 |
| Atex fan ENG 2-2.5 230V 1.07A 120W IP55, steel | 190170500 | € 1.009,00 |
| Atex Fan ENG 2-2.5 230V 1.07A 120W IP55, Stainless Steel | 190170600 | € 1.263,00 |
| SWD Motor Protection Switch 0.16A–0.25A, individual unit | 820300104 | € 131,00 |
| SWD Motor Protection Switch 1.0A–1.6A, individual unit | 820300110 | € 131,00 |
| ATEX Motor Protection Switch 1.0A–1.6A, Standalone | 820300105 | € 1.267,00 |
| SWD Circuit Breaker, 3-pole, 16A, individual unit | 190170402 | € 81,00 |
| ATEX Main Switch, 3-pole, 16A, standalone | 190170502 | € 646,00 |
| stainless steel transport pedestal LS620-EN | 060600225 | € 267,00 |
Labsaver LS1220-EN
